Gr.2 Titanium alloy pipe

Detailed introductionStrictly implements the standard specifications of ASTM B338/ASME SB338,
ASTM B861/ASME SB861, ASTM B862/ASME SB862 ,AMS 4942
Titanium and titanium alloys are attractive structural materials due to their high strength, low density,
excellent corrosion resistance and the ability to withstand extreme temperatures

 

GR 2 Titanium Tube                    GR 1 Titanium Tube             Titanium Alloy Tube      GR 12 Titanium Alloy Tube 

1.Specification and Size for Seamless titanium tubes
Standard: ASTM B338/ASME SB338 ASTM B861/ASME SB861
OD: 2.0-219mm
WT: 0.3-12mm
Length: ≤ 18000mm

2.Specification and Size for Weld tubes
Material ---GR2
Standard: ASTM B338/ASME SB338 ASTM B861/ASME SB861
OD: as customer requirement.
WT: 1.65~12.7mm
Length: ≤18000mm

3. Application
Heat exchangers and condensers
All kinds of corrosive fluid transmission pipeline system
Titanium bicycle tube, automobile exhaust pipe
Off shore aquaculture

4. Featrues of the product
Low Density and High Specificate Strength
Excellent Corrosion Resistance
Good resistance to effect of heat
Excellent Bearing to cryogenic property
Nonmagnetic and Non-toxic
Good thermal properties
5.Other Materials we can supply--- GR1, GR 2,GR3, GR5, GR7, GR9, GR11,GR12, GR16,GR17.
GR1—Ti Grade 1 is the softest titanium with the highest ductility, good cold formability which gives Gr1 an excellent resistance from mild to high oxidization.
GR5—Ti Grade 5 has very high strength but relatively low dectility. The main application of this alloy is in aircraft and spacecraft.Offshore use is growing. The alloy is weldable and can be precipitation hardened.
GR7---Ti Grade 7, most corrosion-resistant titanium alloy offering outstanding resistance to general and localized crevice corrosion in a wide range of oxidizing and reducing acid enviroments including chlorides, with a good balance of moderate strength, reasonable ductility and excellent weldability. Physical and mechanical properties equivalent to Grade 2.
GR9---Ti Grade 9 is sometimes referred to as “half 6-4”. It offers 10~50%higher strength than C.P. grades but is more formable and weldable than Ti-6Al-4V. Gr9 combines strength, weldability and formability. The alloy has excellent formability plus higher tensile strength than the strongest unalloyed grade.
GR12—Ti Grade 12 is highly weldable, exhibiting improved strength allowable at increased temperatures, combined with superior crevice corrosion resistance, and excellent resistance under oxidizing to mildly reducing conditions, especially chlorides.
GR16---Ti Grade 16 is corrosion-resistant material offering outstanding resistance to general and localized crevice corrosion in a wide range of oxidizing and reducing acid environments including chlorides. Has a good balance of moderate strength, reasonable ductility and excellent weldability.